Case Studies
View our case studies, client benefits and independent performance verification tests...
Shell Bonga FPSO Industry 4.0 SBT Inspection
Shell Bonga is one of world’s largest FPSOs, at three hundred meters long, the height of a twelve- storey building and containing over fifteen thousand SBT connectors Bonga poses a significant challenge in managing SBT. Find out how Tru-Fit helped with a safer, faster, more accurate, more cost effective inspection allowing more effective risk management and a move to industry 4.0
Tru-Fit compliance with HSE and Energy Institute ALARP risk management - inspection good practice requirements
Both the UK Health and Safety Executive (HSE) and the Energy Institute Guidelines for the Management of Small-Bore Tubing Assemblies require risk to be kept As Low As Reasonably Practicable (ALARP) to ensure risk is managed effectively - a legal requirement for Duty Holders in the UK and many other countries. Tru-Fit is the only SBT good practice inspection method that meets these requirements.
Tru-Fit independent cost benefit analysis
To determine the cost benefit of using the Tru-Fit® SBT inspection system a large service company SBT Technical Authority performed cost benefit calculations finding Tru-Fit inspection cost 6X less than conventional visual and gauging inspection whilst being more effective, 4X faster and safer.
Tru-Fit - ensuring construction integrity for HSE and EI Guidelines ALARP and Risk-Based Inspection.
Ensuring construction integrity is vital to avoid commissioning and in-service failures and build an effective strategy for the management of SBT. EI Guidelines require ALARP inspection good practice to be embedded within design and construction and demonstrated on an on-going basis. Tru-Fit is the only HSE and EI Guidelines ALARP good practice inspection method that meets these requirements
Tru-Fit independent performance verification trials by TUV:SUD
To determine the efficacy of the Tru-Fit® inspection system TUV SUD National Engineering Laboratory performed an independent performance verification of the Tru-Fit® system to detect major small-bore tubing fitting faults with a 100% success rate.
Independent Carbon Reduction Study
Reducing carbon emissions is a critical for a net zero future. An independent consultants report shows Tru-Fit® can reduce CO2e emissions by 1000 tons per asset. Tru-Fit® is also the only SBT inspection technology recognised by the UK Net Zero Technology Centre as an emissions reduction technology included in their technology roadmapping service to reduce fugutive emissions.